|
|
Use Milton solution on food preparation areas, fridges, storage containers, etc, and to sterilise water storage containers and tanks.
Add 2 half caps (30ml) of Milton Sterilising Fluid to every 5 litres of water (0.6% concentration). Fill tanks and pump through to tap heads. Leave for 15 minutes, drain off, flush out and refill with water.
As above, if they are heavily contaminated with algae inside then leave them overnight and rinse several times before use. Before leaving your motorhome unused for a period of time, add 5ml of Milton Sterilising Fluid to 10 litres of water and leave this in the pipe work as this will prevent any bacterial or fungal growth.
Waste tanks will be treated if you drain them after sterilising the water tanks. If smells persist dismantle the external drain tap and remove any slime, debris or build up and soak in Milton solution as above, then reassemble. Before leaving your motorhome unused for a period of time, add 2 half caps of Milton (30ml) to 5 litres of water and leave this in the tank to prevent smells building up.
After emptying at the Elson point, wipe down outer surfaces of the cassette to make sure it is germ free. Also wipe down the inside of the compartment. Before leaving your motorhome for a period of time, repeat the waste tank process, making sure all traces are removed before blue toilet additives are added.
Add half a teaspoon (2.5 ml) of Milton Sterilising Fluid to every 5 litres of drinking water. Let it stand for 15 minutes before drinking.
| Copyright © 2012 Milton | Use disinfectants safely. Always read the label and product information before use | ||||
| Find us on: |  |
 |
||
